爱必信(上海)生物科技有限公司
欢迎联系我们! 服务热线: 021-38015121
 
 
产品展厅
Annexin V-APC/PI 细胞凋亡检测试剂盒; Annexin V-APC/PI apoptosis analysis kit
  • 品牌:爱必信(absin)
  • 产地:上海
  • 型号:25T,100T
  • 货号:abs50009
  • 发布日期: 2019-10-23
  • 更新日期: 2024-04-19
产品详请
产地 上海
品牌 爱必信(absin)
货号 abs50009
用途范围 Suggested Staining ProtocolA.Parameters regulation1. Harvest cell(1×10<sup>6</sup> -3×10<sup>6</sup> cells), then sepatate the cells in two parts. Wash cells with cold PBS, then centrifuge the cells and disgard the supernatant.2. Suspend one part of cells in 200μL 1× binding buffer, store at 4℃ for use.3. Suspend the other part of cells in 500μL Apoptosis Positive Control Solution, and incubate for 10 minutes in room temperature. Wash cells with more than 3.0 mL cold PBS, blot the supernatant, then suspend the cells in 200μL 1×binding buffer.4. Mix the two parts cells together, then separate the cells in three tubes, and add 100 μL of cells in each tube.5. The first tube is Blank Control, the second one adds 5 μL of Annexin V-APC, and the third one adds 5 μL PI solution.6. Gently vortex each tube and incubate for 5 minutes in room temperature, protected from light.7. Before analyzing by flow cytometry, using the blank control and single dye sample to regulate voltage and compensation, as shown in Figure Parameters regulation.B.Sample detection1. Dilute 3 mL 10×binding buffer with 27 mL distilled water for 10 tests.2. Harvest cell(about 1×10<sup>6</sup>cells per test)then wash with cold PBS.3. Suspend cells in 1 mL 1× Binding Buffer, 300×g centrifugation for 10 minutes, then remove the Binding Buffer from the cell pellet.4. Resuspend cells in 1 mL 1× Binding Buffer , adjust cell concentration to 1×10<sup>6</sup>6cells/mL.5. Add 100 μL of cells (1×10<sup>5</sup>cells) to each labeled tube.6. Add 5 μL of Annexin V-APC to appropriate tubes.7. Gently vortex each tube and incubate for 10 minutes in room temperature, protected from light.8. Add 5 μL PI solution incubation for 5min in room temperature, protected from light.9. Add PBS to 500μL and vortex gently.10. Analyze by flow cytometry in 1 hour.
规格 25T,100T
是否进口

描述:

Annexin V (or Annexin A5) is a member of the annexin family of intracellular proteins that binds to phosphatidylserine (PS) in a calcium-dependent manner. PS is normally only found on the intracellular leaflet of the plasma membrane in healthy cells, but during early apoptosis, membrane asymmetry is lost and PS translocates to the external leaflet. Fluorochrome-labeled Annexin V can then be used to specifically target and identify apoptotic cells. Annexin V Binding Buffer is recommended for use with Annexin V staining.

Products List:Annexin V-APC、Propidium Iodide solution、Annexin V Binding Buffer、Apoptosis Positive Control Solution

应用:

Each lot of this reagent is quality control tested by immunofluorescent staining with flow cytometric analysis (The amount of the reagent is suggested to be used 5 μl/10^5 cells). Since applications vary, the appropriate dilutions must be determined for individual use.

使用方法:

Suggested Staining Protocol A.Parameters regulation 1. Harvest cell(1×106 -3×106 cells), then sepatate the cells in two parts. Wash cells with cold PBS, then centrifuge the cells and disgard the supernatant. 2. Suspend one part of cells in 200μL 1× binding buffer, store at 4℃ for use. 3. Suspend the other part of cells in 500μL Apoptosis Positive Control Solution, and incubate for 10 minutes in room temperature. Wash cells with more than 3.0 mL cold PBS, blot the supernatant, then suspend the cells in 200μL 1×binding buffer. 4. Mix the two parts cells together, then separate the cells in three tubes, and add 100 μL of cells in each tube. 5. The first tube is Blank Control, the second one adds 5 μL of Annexin V-APC, and the third one adds 5 μL PI solution. 6. Gently vortex each tube and incubate for 5 minutes in room temperature, protected from light. 7. Before analyzing by flow cytometry, using the blank control and single dye sample to regulate voltage and compensation, as shown in Figure Parameters regulation. B.Sample detection 1. Dilute 3 mL 10×binding buffer with 27 mL distilled water for 10 tests. 2. Harvest cell(about 1×106cells per test)then wash with cold PBS. 3. Suspend cells in 1 mL 1× Binding Buffer, 300×g centrifugation for 10 minutes, then remove the Binding Buffer from the cell pellet. 4. Resuspend cells in 1 mL 1× Binding Buffer , adjust cell concentration to 1×1066cells/mL. 5. Add 100 μL of cells (1×105cells) to each labeled tube. 6. Add 5 μL of Annexin V-APC to appropriate tubes. 7. Gently vortex each tube and incubate for 10 minutes in room temperature, protected from light. 8. Add 5 μL PI solution incubation for 5min in room temperature, protected from light. 9. Add PBS to 500μL and vortex gently. 10. Analyze by flow cytometry in 1 hour.


看过来……看过来啊……小爱给您推荐您需要的细胞凋亡试剂盒:

细胞凋亡为程序性死亡。细胞凋亡早期磷脂酰丝氨酸(PS)会发生细胞膜由内外翻,Annexin V能与PS 高亲和力结合,利用Annexin V快速检测Apoptosis信号,小爱为您推荐您需要的试剂盒:


?   Annexin V-APC/7-AAD apoptosis analysis kit (abs50008)、

?  Annexin V-APC/PI apoptosis analysis kit(abs50009)、

?  Annexin V-EGFP/PI Apoptosis analysis kit (abs50006)、

?   Annexin V-FITC apoptosis assay kit(abs50001)、

?   Annexin V-PE/7-AAD apoptosis analysis kit (abs50007)、

细胞凋亡中期线粒体膜电位改变,导致膜的通透性改变,细胞色素C(Cytochrome C)释放到细胞浆中,在dATP存在的条件下与凋亡相关因子1(Apaf-1)结合形成多聚体,导致Caspase活化,从而发生一连串细胞凋亡。小爱推荐适合您的凋亡试剂盒:


?   线粒体膜电位检测试剂盒(JC-1) (abs50016)、

?  线粒体膜电位检测试剂盒(JC-10)(abs50017)、

?  TUNEL细胞凋亡检测试剂盒-FITC( abs50021)、

?   TUNEL Apoptosis Detection Kit-DAB(abs50022)、

联系方式
手机:15502157206
Q Q: